EchelonGraph verdictPlan mitigationNo release containing the referenced fix is confirmed: check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule (the SSVC decision on this page).
- •High severity, but no confirmed exploitation yet
CISA-KEV: Not listedEPSS PROB: 0.1%CVSS: 7.8Exploit: None knownExposed services: Not assessed
A fix is referenced (a reference tagged "Patch", often a source commit), but no release containing it is confirmed — find the release that contains it; until it is applied, mitigate (WAF / firewall / segmentation).
The user-mode syscall verifier z_vrfy_i2s_configure() in drivers/i2s/i2s_handlers.c copies the caller's struct i2s_config in from user memory and then, when cfg->frame_clk_freq is 0 (the API's "unconfigure the stream" request), jumps straight to z_impl_i2s_configure() without performing the K_SYSCALL_OBJ(config.mem_slab, K_OBJ_MEM_SLAB) ownership/type check or the block_size sanity check. The mem_slab field is a struct k_mem_slab *, so on that path a completely unvalidated, user-chosen pointer reaches driver code that is entitled to trust it as a real kernel object.
Any thread running under CONFIG_USERSPACE that has access to an I2S device object can trigger this with a single i2s_configure() call. Most in-tree drivers special-case frame_clk_freq == 0 and never store the caller's structure, but drivers/i2s/i2s_litex.c does not: i2s_litex_configure() only logs a warning for a mismatched frame clock, then memcpy()s the caller's config into stream->cfg and marks the stream I2S_STATE_READY. A subsequent i2s_trigger() with I2S_TRIGGER_START enables the FIFO interrupt, and the interrupt handlers i2s_litex_isr_rx() / i2s_litex_isr_tx() then call k_mem_slab_alloc() and k_mem_slab_free() on the attacker-supplied pointer in supervisor context.
The result is an arbitrary-pointer read/write primitive executed by the kernel on behalf of an unprivileged thread — k_mem_slab_alloc() takes a spinlock at slab->lock and reads and writes slab->free_list and the link word inside the returned "block" — which defeats the CONFIG_USERSPACE isolation boundary entirely. The same missing validation is a hazard for out-of-tree I2S drivers that retain the configuration on the unconfigure path. Builds without CONFIG_USERSPACE are unaffected, since the verifier is not used.
The fix zeroes config.mem_slab and config.block_size on the unconfigure path so the driver can never receive an unvalidated pointer, while still allowing a stream to be unconfigured by a caller that does not own a memory slab, as the API documents.
What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)
The EG score (7.8): severity, escalated by confirmed exploitation. This CVE's 7.8 is its impact severity (EG Severity), not escalated.
- EG Severity
- 7.8 HIGHCVSS-B, impact only: no KEV listing, EPSS or EG-KEV tier raises it.a secondary CVSS source · CVSS v3.0 or v3.1
- EG Likelihood
- 0.1% within 30 daysSource: FIRST EPSS. FIRST's exploitation probability, not an EchelonGraph model.
- Confirmed exploitation
- None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
- EG Priority
- SSVC Track at medium mission impactTrack at low or medium mission impact; Track* at high (mission-essential systems).CISA BOD 26-04: 14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.Each input and its source, and whom BOD 26-04 binds: the SSVC and BOD 26-04 blocks below.
SSVC (CISA's decision table, applied by EchelonGraph)Track at low or medium mission impact; Track* at high (mission-essential systems).
A fix is referenced, but no release containing it is confirmed. Check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule.
Exploitation none (no CISA value, KEV listing or exploit code on record) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). EchelonGraph holds no SSVC assessment of this CVE from CISA: none of these inputs is from Vulnrichment. EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE. Mission impact is CISA's Mission & Well-being decision point, and only you can judge it. CISA's table makes it high when Mission Prevalence is Essential — the vulnerable component "directly provides capabilities that constitute at least one MEF for at least one entity" (MEF: mission essential function) — or when Public Well-Being Impact is Irreversible: "multiple fatalities are likely", the cyber-physical system "is likely lost or destroyed", "extreme or serious externalities" are imposed on other parties, or social systems such as elections or the financial grid "are destabilized and potentially collapse". CISA's decision table
BOD 26-04 (CISA's remediation timeline, Table 1)14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.
No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.
The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). Where an input reads “CISA's BOD 26-04 default”, no one has published it for this CVE, and CISA's implementation guidance says: “If “Automatable” and “Technical Impact” information items about a CVE ID are not available and the CVE ID is not in the KEV Catalog, CISA will treat its values as “no” and “total,” respectively, until CISA or a third party provides metadata about the CVE ID. CISA will always provide the Vulnrichment data for a CVE ID listed in the KEV Catalog.” Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it