CVE-2026-19575

HIGHPre-NVD 7.87.8
EchelonGraph scoreMEDIUM confidence

“—” beside the score: it is equal to the CVSS score beside it.

This high-severity CVE scores 7.8 under a secondary CVSS source (NVD's own analysis pending). EPSS exploit probability: 0.1% (1st percentile of EPSS-scored CVEs). No GitHub Security Advisory CVSS is on record for this CVE.

Triggered by: Headline CVSS from a secondary CVSS source
Sources: EPSS, a secondary CVSS source

Also known asEUVD-2026-95530 (ENISA EUVD)Source: ENISA EUVD

7.8EG
EchelonGraph verdictPlan mitigationNo release containing the referenced fix is confirmed: check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule (the SSVC decision on this page).
  • High severity, but no confirmed exploitation yet
CISA-KEV: Not listedEPSS PROB: 0.1%CVSS: 7.8Exploit: None knownExposed services: Not assessed

A fix is referenced (a reference tagged "Patch", often a source commit), but no release containing it is confirmed — find the release that contains it; until it is applied, mitigate (WAF / firewall / segmentation).

The user-mode verification handler for the device_deinit() system call, z_vrfy_device_deinit() in kernel/device.c, validated its dev argument with K_SYSCALL_OBJ_INIT(dev, K_OBJ_ANY). k_object_validate() short-circuits its type comparison when the requested type is K_OBJ_ANY, so the check reduced to "this pointer is the base address of some kernel object the calling thread has been granted" — the object's actual type was never compared, and K_SYSCALL_OBJ_INIT also skips the initialization-state check. The sibling handlers z_vrfy_device_init() and z_vrfy_device_is_ready() already used K_OBJ_DRIVER_ANY and were unaffected.

A thread running in user mode can therefore pass any kernel object it holds permission on — most usefully a thread stack object obtained from the k_thread_stack_alloc() syscall or a statically defined K_THREAD_STACK it was granted in order to spawn a child user thread — whose backing memory is writable from user mode. z_impl_device_deinit() then interprets those attacker-written bytes as a struct device: it dereferences the state pointer read out of the object, calls the function pointer read out of ops.deinit, and on success writes through state again. The result is an indirect call to an arbitrary address executed in supervisor mode, plus an arbitrary kernel read and a single-byte kernel write.

Exploitation gives a local unprivileged thread full kernel code execution, defeating the CONFIG_USERSPACE isolation boundary entirely; a less precise attempt yields a supervisor-mode fault and a system crash. The defect is only reachable in builds that enable both CONFIG_USERSPACE and CONFIG_DEVICE_DEINIT_SUPPORT — with de-initialization support disabled, z_impl_device_deinit() returns -ENOTSUP without ever dereferencing the pointer. In v4.2.x and v4.3.x, CONFIG_DEVICE_DEINIT_SUPPORT defaulted to y, so every CONFIG_USERSPACE build of those releases is exposed unless the option was explicitly turned off. From v4.4.0 the option is opt-in (no default, and not selected by any in-tree subsystem), so a v4.4.x build is exposed only if it enables the option explicitly. The v4.2 line is no longer maintained and receives no backport.

The fix changes the object check to K_OBJ_DRIVER_ANY, which constrains the argument to the build-generated driver object type range (K_OBJ_DRIVER_FIRST..K_OBJ_DRIVER_LAST) — the real struct device instances placed by the linker — so the state and ops.deinit fields are once again kernel-controlled.

CVSS v3
7.8
EG Score
7.8HIGHmedium confidence
EG Risk
35
EG Risk 35/100

EG Risk is EchelonGraph's 0–100 priority score. It fuses impact severity (EG Severity, the CVSS base score, never the KEV-floored or EPSS-lifted EG Score) with real-world exploitation and automatability, under weights EchelonGraph set by hand, so you can rank equal-severity CVEs and fix the most dangerous first. Higher = act sooner.

How it’s computed (value × EchelonGraph’s weight)
Severity78% × 45%
Impact severity (EG Severity): CVSS 7.8 of 10. Never the KEV-floored or EPSS-lifted EG Score.
Exploitation0.1% × 40%
FIRST EPSS: the 30-day exploitation probability when EchelonGraph scored this CVE.
Automatability0% × 15%
CISA's SSVC Automatable value: no (Vulnrichment).
SSVC (CISA's decision table, applied by EchelonGraph): Track at low or medium mission impact; Track* at high (mission-essential systems).
Exploitation none (CISA Vulnrichment) · Automatable no (CISA Vulnrichment) · Technical impact total (CISA Vulnrichment). All three are CISA's SSVC values (Vulnrichment). EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE.
Action: A fix is referenced, but no release containing it is confirmed. Check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule.
EPSS PROB
0.1%
EPSS %ILE
1st
KEV
Not listed

What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)

The EG score (7.8): severity, escalated by confirmed exploitation. This CVE's 7.8 is its impact severity (EG Severity), not escalated.

EG Severity
7.8 HIGHCVSS-B, impact only: no KEV listing, EPSS or EG-KEV tier raises it.a secondary CVSS source · CVSS v3.0 or v3.1
EG Likelihood
0.1% within 30 daysSource: FIRST EPSS (model v2026.06.15, score date 2026-10-31). FIRST's exploitation probability, not an EchelonGraph model.
Confirmed exploitation
None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
EG Priority
SSVC Track at medium mission impactTrack at low or medium mission impact; Track* at high (mission-essential systems).CISA BOD 26-04: 14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.Each input and its source, and whom BOD 26-04 binds: the SSVC and BOD 26-04 blocks below.

SSVC (CISA's decision table, applied by EchelonGraph)Track at low or medium mission impact; Track* at high (mission-essential systems).

A fix is referenced, but no release containing it is confirmed. Check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule.

Exploitation none (CISA Vulnrichment) · Automatable no (CISA Vulnrichment) · Technical impact total (CISA Vulnrichment). All three are CISA's SSVC values (Vulnrichment). EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE. Mission impact is CISA's Mission & Well-being decision point, and only you can judge it. CISA's table makes it high when Mission Prevalence is Essential — the vulnerable component "directly provides capabilities that constitute at least one MEF for at least one entity" (MEF: mission essential function) — or when Public Well-Being Impact is Irreversible: "multiple fatalities are likely", the cyber-physical system "is likely lost or destroyed", "extreme or serious externalities" are imposed on other parties, or social systems such as elections or the financial grid "are destabilized and potentially collapse". CISA's decision table

BOD 26-04 (CISA's remediation timeline, Table 1)14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.

No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.

The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA Vulnrichment) · Technical impact total (CISA Vulnrichment). Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it

Published

October 9, 2026

Last Modified

October 9, 2026

Advisory Details (2)

Auto-updated Oct 9, 2026
Fix referenced — no release confirmed yet. Sources: github, github_commit.
GitHub advisoryMentions a patch (unverified)

Type confusion in the device_deinit system call allows user-mode threads to execute arbitrary kernel code · Advisory · zephyrproject-rtos/zephyr · GitHub

https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-j9m4-fr5f-49wm
GitHub commit

commit 1036694889ab (zephyrproject-rtos/zephyr)

Fix landed in zephyrproject-rtos/zephyr commit 1036694889ab — awaiting tagged release

https://github.com/zephyrproject-rtos/zephyr/commit/1036694889ab33996db41b4141ddf66aa786d267

Weakness Classification(1)

MITRE Common Weakness Enumeration — the root-cause categories this CVE belongs to.

Data Freshness Timeline

(refreshed 7× in last 7d / 38× in last 30d)

Each row is a time one of our pipelines fetched, updated or re-scored this CVE. For example, "NVD update" means NVD published or revised its analysis for this CVE; "MITRE cvelistV5" means we ingested or refreshed it from the CNA feed. An arrow marks a change the record states ("CVSS v3 → 9.1"); EPSS and GHSA rows show the values recorded at that time, not what changed (EPSS values are rounded; hover one for the exact figures). Most recent first.

  1. 2026-11-02 16:44 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  2. 2026-11-01 16:34 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  3. 2026-11-01 07:20 UTCEG score recompute
  4. 2026-10-31 16:32 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  5. 2026-10-30 16:33 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  6. 2026-10-28 16:31 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  7. 2026-10-27 16:31 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  8. 2026-10-26 16:31 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  9. 2026-10-25 16:32 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  10. 2026-10-25 14:44 UTCEG score recompute
  11. 2026-10-25 00:30 UTCEG score recompute
  12. 2026-10-24 16:32 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  13. 2026-10-23 16:31 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  14. 2026-10-21 16:32 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  15. 2026-10-20 16:32 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  16. 2026-10-19 16:31 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  17. 2026-10-18 16:31 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  18. 2026-10-18 03:58 UTCEG score recompute
  19. 2026-10-17 17:42 UTCEG score recompute
  20. 2026-10-16 16:40 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  21. 2026-10-15 16:31 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  22. 2026-10-14 16:32 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  23. 2026-10-13 16:33 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  24. 2026-10-12 16:33 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  25. 2026-10-12 16:25 UTCEG score recompute
Show 13 more
  1. 2026-10-11 20:06 UTCEG score recompute
  2. 2026-10-11 17:19 UTCEG score recompute
  3. 2026-10-11 13:57 UTCEG score recompute
  4. 2026-10-11 13:48 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  5. 2026-10-11 03:08 UTCEG score recompute
  6. 2026-10-10 19:59 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  7. 2026-10-10 05:25 UTCEG score recompute
  8. 2026-10-09 20:06 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  9. 2026-10-09 18:35 UTCEG score recompute
  10. 2026-10-09 18:04 UTCEG score recompute
  11. 2026-10-09 08:28 UTCEG score recompute
  12. 2026-10-09 07:34 UTCEG score recomputeFirst assessed: 7.8 HIGH
  13. 2026-10-09 07:33 UTCMITRE cvelistV5first tracked

Frequently asked(5)

What is CVE-2026-19575?
CVE-2026-19575 is a high-severity vulnerability; its CVE record was published on October 9, 2026. The user-mode verification handler for the device_deinit() system call, z_vrfy_device_deinit() in kernel/device.c, validated its dev argument with K_SYSCALL_OBJ_INIT(dev, K_OBJ_ANY). k_object_validate() short-circuits its type comparison when the requested type is K_OBJ_ANY, so the check reduced to…
When was the CVE record for CVE-2026-19575 published?
The CVE record for CVE-2026-19575 was published on October 9, 2026. That is the record's publication date; the vulnerability itself may have been made public earlier. EchelonGraph's copy of the record carries a last-modified date of October 9, 2026; the record at its source may have been updated since.
Is CVE-2026-19575 actively exploited?
CVE-2026-19575 is not currently on CISA's Known Exploited Vulnerabilities catalog. FIRST EPSS estimates a 0.1% probability of exploitation in the next 30 days (1st percentile of EPSS-scored CVEs).
What is the CVSS score of CVE-2026-19575?
CVE-2026-19575 has a CVSS base score of 7.8 (a secondary CVSS source that NVD displays; NVD's own analysis pending).
How do I remediate CVE-2026-19575?
A fix for CVE-2026-19575 is referenced (a reference tagged "Patch", often a source commit), but EchelonGraph has no release containing it on record. Check that reference and the vendor's advisory for a release that contains the fix and update to it; until then, restrict network exposure of the affected system or apply the vendor's mitigation.

Dependency Blast Radius

Explore the affected products and dependency analysis for CVE-2026-19575

Explore →

Is Your Infrastructure Affected by CVE-2026-19575?

EchelonGraph automatically scans your cloud infrastructure and maps CVE exposure using blast radius analysis.