EchelonGraph verdictMonitorNo release containing the referenced fix is confirmed: check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule (the SSVC decision on this page).
- •Lower severity and no public exploit yet
CISA-KEV: Not listedEPSS PROB: 0.2%CVSS: 4.6Exploit: None knownExposed services: Not assessed
A fix is referenced (a reference tagged "Patch", often a source commit), but no release containing it is confirmed — find the release that contains it; until it is applied, mitigate (WAF / firewall / segmentation).
In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code.
As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target.
An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral.
The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked.
What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)
The EG score (4.6): severity, escalated by confirmed exploitation. This CVE's 4.6 is its impact severity (EG Severity), not escalated.
- EG Severity
- 4.6 MEDIUMCVSS-B, impact only: no KEV listing, EPSS or EG-KEV tier raises it.NVD CVSS v3 · CVSS v3.0 or v3.1
- EG Likelihood
- 0.2% within 30 daysSource: FIRST EPSS (model v2026.06.15, score date 2026-10-24). FIRST's exploitation probability, not an EchelonGraph model.
- Confirmed exploitation
- None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
- EG Priority
- SSVC Track at medium mission impactTrack at every mission impact level.CISA BOD 26-04: 60 days if the affected system is publicly exposed; Fix on system upgrade if it is not.No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.Each input and its source, and whom BOD 26-04 binds: the SSVC and BOD 26-04 blocks below.
SSVC (CISA's decision table, applied by EchelonGraph)Track at every mission impact level.
A fix is referenced, but no release containing it is confirmed. Check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule.
Exploitation none (CISA Vulnrichment) · Automatable no (CISA Vulnrichment) · Technical impact partial (CISA Vulnrichment). All three are CISA's SSVC values (Vulnrichment). EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE. Mission impact is CISA's Mission & Well-being decision point, and only you can judge it. CISA's table makes it high when Mission Prevalence is Essential — the vulnerable component "directly provides capabilities that constitute at least one MEF for at least one entity" (MEF: mission essential function) — or when Public Well-Being Impact is Irreversible: "multiple fatalities are likely", the cyber-physical system "is likely lost or destroyed", "extreme or serious externalities" are imposed on other parties, or social systems such as elections or the financial grid "are destabilized and potentially collapse". CISA's decision table
BOD 26-04 (CISA's remediation timeline, Table 1)60 days if the affected system is publicly exposed; Fix on system upgrade if it is not.
No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.
The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA Vulnrichment) · Technical impact partial (CISA Vulnrichment). Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it